Radio Shack STAV-3780 - Manual (Page 15)

15
Preparing Your Receiver
Using the AC Power Outlet Your receiver has an AC power outlet that you can use to power an elec-
tronic device, such as a turntable, cassette deck, or VCR. This switched
outlet turns on and off with the receiver and provides a maximum of
100 watts.
Connecting to AC Power Before you plug in the receiver’s power cord, double check all other con-
nections.
To power the receiver, plug the supplied power cord into a standard AC
outlet. The power cord’s plug is polarized and fits only one way.
Caution: Do not connect appliances with
high power consumption, such as a
heater, iron, monitor, or TV, to this AC
outlet. Doing so can cause a risk of over-
heating and fire, and could damage the
receiver.
AC OUTLET
SWITCHED
100W MAX
0.8A MAX
IMPEDANCE
SELECTOR
8 ~16 Ω /
SPEAKER DO NOT CONNECT
TV SET OR MONITOR.
6~LESS THAN 8 Ω /
SPEAKER
SEE INSTRUCTION
MANUAL
CAUTION: CAUTION:
AC 120V 60Hz
Warning: To prevent electric shock, do
not use this polarized plug with an exten-
sion cord, receptacle, or other outlet un-
less you can fully insert the blades to
prevent blade exposure.
FRONT SPEAKERS
AC OUTLET
SWITCHED
100W MAX
0.8A MAX
IMPEDANCE
SELECTOR
CENTER SPEAKER SURROUND SPEAKERS
L R
L R
L R
L R
A
B
A
B
8 ~16 Ω /
SPEAKER DO NOT CONNECT
TV SET OR MONITOR.
6~LESS THAN 8 Ω / SPEAKER
SPEAKER IMPEDANCE 6 Ω OR 8 Ω ~16 Ω / SPEAKER
SEE INSTRUCTION MANUAL
CAUTION: CAUTION:
CAUTION:
AC 120V 60Hz