Radio Shack STAV-3780 - Manual (Page 31)

31
Using the Remote Control
DVD Player Operation
Note: You must have programmed the code for your DVD player into the
remote control for these functions to work.
Before operation, press DVD (or the one connected to your DVD player) to
select DVD player operation.
POWER Turns on/off the DVD player.
Press to switch the audio input. On some DVD players, pressing
this button switches the angle.
| / | Returns to the beginning of the current chapter/track or advances
to the next chapter/track.
/ Rapidly advances backward/forward within a chapter/track.
Press to pause play. Press again to resume. On some DVD play-
ers, press to pause the playback so you can view a single frame
(freeze-frame operation).
Stops playback.
Plays the disc.
DISC Turns the menu on/off.
The number buttons and +10 work differently depending on the type of
DVD players you are using. The two basic systems are:
A. Some models use the buttons as the normal number buttons.
Number Buttons Selects chapter/track.
+10 Enters 10 of the chapter/track number. For example, to enter
chapter/track 15, press
+10 then 5 .
B. Some models use the buttons as the cursor buttons.
2 Up arrow ( ▲ )
4 Left arrow( )
5 ENTER
6 Right arrow ( )
8 Down arrow ( ▼ )
9 MENU
0 RETURN
+10 TITLE
CONTROL
MODE
DVD
Buttons
DVD