Radio Shack 13-1317 - Manual (Page 3)

3
%&"2.#;'4"
12'4#6+10
2
.#;+0)
"
#
"%&
1. Repeatedly press FUNCTION on the
stereo or remote control to switch to CD
mode. If the CD side does not face
front, press
ROTATE to turn the CD side
to the front. #
2. To open the CD door, press OPEN .
3. Hold the CD disc by its edges and
carefully place it into CD compartment
with the label-side visible.
4. Close the CD cover. The total number
of tracks and total playing time are
displayed.
5. Press PLAY/PAUSE on the stereo or â
on the remote. The CD starts playing
from the first track. The track number
and elapsed time of the current playing
track are displayed.
Or, press one of the number buttons on
the remote control to select a track to
play.
To play tracks 11 to 19, press +10 then
the second digit. For example to play
track 13, press
+10 first.
''''
is displayed.
Then, press 3 . ±
Press PLAY/PAUSE on the stereo or â on
the remote to pause temporarily. The
elapsed time indicator flashes on the
display. Press
PLAY/PAUSE on the stereo or
â on the remote again to resume playing.
The CD stops automatically at the end of the
last track. When CD playing stops, the
display shows the total number of tracks and
total playing time. To stop playing sooner,
press
STOP/BAND .
5
-+2
"5
'#4%*
You can use the skip search before or
during play to quickly locate any track.
While the CD player is stopped, press ) or
- repeatedly until the desired track is
displayed, then press PLAY/PAUSE on the
stereo or â on the remote to play the track.
During play, press ) once to return to the
beginning of the current track. Press )
twice quickly to return to the beginning of
the previous track. To move to the beginning
of the next track, press
- .
#
7&+$.'
"5
'#4%*
To search for a particular section within a
track, hold down
) or - during play. The
CD player rapidly plays the CD either
forward or backward at a high speed and
low volume. When you hear the section you
want, release
) or - to resume normal
play.
If you hold down - while the last track is
playing, audible forward search stops at the
end of that last track. If you hold down
)
while the first track is playing, audible
backward search stops at the beginning of
track one, and then plays the first track at
normal speed.
4
'2'#6
"2
.#;
You can set the CD player to continuously
play a single track, all tracks, or all of the
programmed tracks on the loaded CD.
During play, press REPEAT/MEM UP
repeatedly until
H;F;7J H;F;7J H;F;7J H;F;7J
flashes on the
display, the current track will be repeated.
To repeat all tracks, press REPEAT/MEM UP
repeatedly until
H;F;7J H;F;7J H;F;7J H;F;7J
lights steadily.
To end repeat play, press REPEAT/MEM UP
repeatedly until
H;F;7J H;F;7J H;F;7J H;F;7J
disappears.
+
0641
"5
%#0
You can set the CD player to play the first
10 seconds of each track on a loaded CD,
so you can find the track you want to hear.
The player will not start scanning from the
first track during play. To start scanning from
the first track, press
STOP/BAND (if
necessary), and press INTRO .
?DJHE ?DJHE ?DJHE ?DJHE
appears
on the display.
To start scanning while CD is playing,
repeatedly press
INTRO until
?DJHE ?DJHE ?DJHE ?DJHE
appears.
Intro scan starts at once from the next track
forward.
During intro play, you can press ) or - to
skip backward or forward. You can also set
the player to repeatedly scan by pressing
REPEAT .
To stop scanning and resume normal play,
repeatedly press
INTRO until
?DJHE ?DJHE ?DJHE ?DJHE
disappears.
4
#0&1/
"2
.#;
You can set the CD player to randomly
select and play tracks from a loaded CD.
While the CD player is stopped, press
RANDOM . The CD player starts random play
at once, and
H7D:EC H7D:EC H7D:EC H7D:EC
is displayed.
While the CD player is playing, repeatedly
press
RANDOM until
H7D:EC H7D:EC H7D:EC H7D:EC
appears. The
CD player starts random play when the
current track playing finishes.
To cancel random play, repeatedly press
RANDOM until
H7D:ECý H7D:ECý H7D:ECý H7D:ECý
disappears.
2
41)4#//+0)
"%&"6
4#%-5
You can program up to 20 tracks from the
loaded CD to play in any order you choose,
and you can also program the same track to
play more than once.
# "+/2146#06" #
To avoid damaging the CD player, remove
the CD insert protection card before using
the player.
±
"016'"
±
"
• To play track 20 or above, press +10 twice,
then the second digit. For example to play
track 24, press +10 twice.
((((
is displayed.
Then, press 4.
• 10 also acts as a 0. For example, to play
track 20, press +10 twice, then 10.