Nokia X500 - Manual (Page 67)

3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be transmitted, a tone
sounds, and you are asked to enter a passcode.
When the connection is established, Sending data is displayed.
Pair devices
To pair with compatible devices and view your paired devices, in the main view of
Bluetooth connectivity, scroll right.
Before pairing, create your own passcode (1 to 16 digits), and agree with the owner
of the other device to use the same code. Devices that do not have a user interface
have a factory-set passcode. The passcode is used only once.
1 To pair with a device, select
Options
>
New paired device . Devices that are
within range are displayed.
2 Select the device, and enter the passcode. The same passcode must be entered
on the other device as well.
3 Some audio enhancements connect automatically to your device after pairing.
Otherwise, scroll to the enhancement, and select Options > Connect to audio
device .
Paired devices are indicated by in the device search.
To set a device as authorised or unauthorised, scroll to the device, and select from
the following options:
Set as authorised — Connections between your device and the authorised device
can be made without your knowledge. No separate acceptance or authorisation is
needed. Use this status for your own devices, such as your compatible headset or
Connections 67
© 2010 Nokia. All rights reserved.