Nokia X500 - Manual (Page 49)

allows the zoom increments to pause at the digital and extended digital step point,
and Off allows a limited amount of zoom while retaining the image resolution. Use
the extended zoom only when getting closer to the subject is more important than
the final image quality. The overall quality of a digitally zoomed image is always
lower than that of an unzoomed image.
Capture tone — Set the tone that sounds when you capture an image.
Memory in use — Select where to store your images.
Restore camera settings — Restore the camera settings to default values.
Colour and lighting settings
In the active toolbar, select from the following:
Flash mode ( ) (image only) — Select the desired flash mode.
Colour tone ( ) — Select a colour effect.
Switch video light on or Switch video light off — Switch the video light on or
off (video mode only).
White balance ( ) — Select the current lighting condition. This allows the camera
to reproduce colours more accurately.
Exposure compensation ( ) (image only) — If you are shooting a dark subject
against a very light background, such as snow, adjust the exposure to +1 or +2 to
compensate for the background brightness. For light subjects against a dark
background, use -1 or -2.
Sharpness ( ) (image only) — Adjust the sharpness of the image.
Contrast ( ) (image only) — Adjust the difference between the lightest and
darkest parts of the image.
Light sensitivity ( ) (image only) — Increase the light sensitivity in low light
conditions to avoid too dark images.
The screen display changes to match the settings you make.
Camera 49
© 2010 Nokia. All rights reserved.