National Instruments USB device 628x - Manual (Page 22)

NI USB-622x/625x/628x OEM User Guide 22 ni.com
2. Edit the device INF file by opening nimioxsu.inf with a text editor.
At the bottom of this file are the descriptors where Windows looks to
identify the device. Locate the two lines of text that contain in quotes
the descriptors for the device name you are modifying. Change the
descriptor on both lines to the new device name, as shown in Figure 18.
Figure 18. INF File Descriptors Changed to “My Device” (Windows 2000)
3. Save and close the INF file.
4. Go to the Windows Device Manager, right-click the OEM device under
Data Acquisition Devices, and select Uninstall.
5. Power down the OEM device and disconnect the USB cable from
your PC.
Original File
Modified File