N-Tron 9000 Series - Manual (Page 95)

5/17/2007 page 95 of 138
Set SNMP Set Community name
Command Name system set snmpsetcommunity
Description To set the community name for performing snmpset operation
Syntax system set snmpsetcommunity
Parameters Community-Name
The name of the community to be used for performing snmpset
operation
Example N-TRON/Admin#[1]> system set snmpsetcommunity private
N-TRON/Admin#[1]> system set snmpsetcommunity “N-
Tron_Systems”
Notes Arguments cannot have spaces. You can use an underscore (‘_’) instead
of a space.
Set SNMP Trap Community name
Command Name system set snmptrapcommunity
Description To set the community name for raising snmp trap
Syntax system set snmptrapcommunity
Parameters Community-Name
The name of the community to be used for raising snmp trap
Example N-TRON/Admin#[1]> system set snmptrapcommunity private
N-TRON/Admin#[1]> system set snmptrapcommunity “N-
Tron_Systems”
Notes Arguments cannot have spaces. You can use an underscore (‘_’) instead of
a space.
Show all configuration parameters
Command Name system show config
Description Displays the software version, the mac address, and status of gigabit ports.
Syntax system show config
Parameters None
Example N-TRON/Admin#[32]system/show> config
System Configuration :
IP Configuration Mode: manual
System IP Address : 192.168.1.201
Subnet Mask : 255.255.255.0
Gateway Address : 192.168.1.1
System Name : N-TRON Switch
System Contact : N-TRON Admin
System Location : Mobile, AL 36609
System Up Time : 9 days:17 hours:15 mins:2 secs
Model Description Value Not Configured
---
---
Software Version: 2.3.12
Loader Version : LOADER1.20
MAC Address : 00:07:af:00:b1:20
Uplink port#25 : No Transceiver Installed
port#26 : No Transceiver Installed
Notes