N-Tron 9000 Series - Manual (Page 118)

5/17/2007 page 118 of 138
Display List of Configured Static MAC Addresses
Command Name bridge show staticmac
Description To view the list of configure static mac addresses
Syntax bridge show staticmac
Parameters
which set of static mac addresses to show
Examples N-TRON/Admin#[1]> bridge show staticmac all
N-TRON/Admin#[2]> bridge show staticmac multicast
N-TRON/Admin#[3]> bridge show staticmac unicast
NOTES
Set Aging Time
Command Name bridge set agingtime
Description Sets the aging time for dynamically learned MAC addresses of the chipset.
Syntax bridge set agingtime
Parameters aging-time
aging time to be set for stp.
Minimum aging time can be 5 seconds.
Default aging time is 20 seconds.
Maximum aging time is 1000000 seconds.
Examples N-TRON/Admin#[1]> bridge set agingtime 200
NOTES
Display Current Aging Time
Command Name bridge show agingtime
Description Displays the current aging time.
Syntax bridge show agingtime
Parameters None
Examples N-TRON/Admin#[1]> bridge show agingtime
NOTES
Display Mac Address by port
Command Name bridge show macbyport
Description Displays all the mac address which are associated with the given port.
Syntax bridge show macbyport
Parameters port-number
The port number must range between 1 and maximum port numbers in
the switch.
Examples N-TRON/Admin#[1]> bridge show macbyport 6
NOTES
Display port by Mac Address
Command Name bridge show portbymac
Description Display the port number to which the mac is associated.
Syntax bridge show portbymac
Parameters mac-address
Unique unicast mac address.
Examples N-TRON/Admin#[1]> bridge show portbymac 00-a0-ae-60-3a-70
NOTES
Display Mac count
Command Name bridge show maccount
Description Displays the total count of the static mac addresses.
Syntax bridge show maccount
Parameters None
Examples N-TRON/Admin#[1]> bridge show maccount
NOTES