N-Tron 9000 Series User Manual
Page 39
5/17/2007 page 39 of 138
VLAN – Port Based, Continued…
Now the page will display the new VLAN and moved ports A1-A6 from the default VLAN down to
vlan2 that was just created.
To delete or remove VLANs that are no longer wanted simply click on the Delete button on the main
Port Based VLAN page. That button will load the page where the user can enter the VLAN ID that he or
she wishes to delete.
(See VLAN Configuration Examples on Page 133)
Note: When implementing overlapping VLANs, RSTP can only be enabled on one of the VLANs that is
overlapping others. RSTP can not be implemented on a VLAN that contains other VLANs within
that one. Changing anything on a VLAN will turn on RSTP on all VLANS as a precautionary
measure.