Nikon COOLPIX E900 - Manual (Page 20)

10 First Steps: Putting Batteries in Your Camera
Putting Batteries in Your Camera
1. Turn the camera off
When putting new batteries in your camera, first
rotate the selector dial to OFF. If the camera is on
a tripod, the camera must be removed from the
tripod before the batteries can be replaced.
2. Open the battery cover
Turn the camera upside down and unlatch the
battery chamber by pushing the button and sliding
the cover away from the camera. Then raise and
open the lid.
3. Insert batteries
Insert the batteries with the positive (+) and
negative (-) poles aligned as shown in the diagram
on the underside of the cover.
4. Close the battery cover
Close the cover and slide it back until it latches.