3 connecting the scsi cable – Nikon AX-210 User Manual
Page 29
Nikon
ScanTouch 210 User's Manual
19
4.3
Connecting the SCSI Cable
Before connecting the SCSI cable, confirm that all SCSI devices,
including the computer system, have been turned off.
Power OFF
Connect the unit to the computer using the SCSI cable provided. After
attaching the connector, be sure to lock it in place. You can connect the
SCSI cable to either of the SCSI connectors (50-pin and 25-pin) on the
rear panel of the unit.
Caution:
Do not touch the pins of the SCSI connector. This can
result in static damage.
4. Connecting the Scanner