Rear view, Parts identification – Nikon AX-210 User Manual
Page 24
14
Nikon
ScanTouch 210 User's Manual
Rear View
3. Parts Identification
Carriage Lock:
When transporting the unit, fasten the screw to
lock the carriage.
AC Inlet:
Connect to the AC power source with the power
cord provided.
Power Switch:
Directly turns the AC power on/off.
Option Connector:
This connector is for use with a Transparency
Adapter or an Automatic Document Feeder.
25-pin SCSI Connector:
For 25-pin SCSI cable connection.
50-pin SCSI Connector:
For 50-pin SCSI cable connection.
SCSI ID Selection Switch:
Sets the SCSI ID number. Numbers 0 to 7 are
shown and valid.
Power Switch
25-pin SCSI
Connector
50-pin SCSI
Connector
SCSI ID Selection Switch
Option Connector
AC Inlet
Carriage Lock