Navman iCN 500 series - Manual (Page 76)

76
iCN 500 series | User Manual
3. On the second Preferences screen, tap Hardware.
The Hardware screen will display
4. From the Hardware screen, tap Power Status.
The Power Status screen will display.
5. Press to return to the Main Menu screen.
Hardware Preferences - Power Options
1. From the Main Menu screen, tap Preferences.
The Preferences screen will display.
2. From the Preferences screen, tap More Preferences.
The second Preferences screen will display.
3. On the second Preferences screen, tap Hardware.
The Hardware screen will display
4. From the Hardware screen, tap Power Options.
The Power Options screen will display.
5. Complete the following:
If you want to... Then...
change the time to
elapse before entering
suspended state, when
connected to an external
power source select the Go to Power Saving Mode if not used for check
box under External Power.
select the time to elapse when connected to an external
power source before entering suspended state by tapping
the left or right arrows or using the left and right sides of the
4-way toggle.