Installation, 1) set the rf mode dipswitches, Figure 9 – Niles Audio RFG User Manual
Page 14: Rf mode dipswitch setting
12
Position of switch
InStALLAtIon
CautIon: the RFG antenna ConneCtIon IS SuSCeptIble to StatIC DISChaRGe. be
SuRe to uSe a GRounDInG StRap oR touCh an eaRth GRounD pRIoR to pICkInG up
the RFG. hanDle the RFG by the plaStIC houSInG. avoID touChInG the antenna
ConneCtIon DIReCtly.
1) set the RF Mode dipswitches (
Figure 9
)
2) connect cAt-5 cABle
Connection to a MultiZone receiver or a keypad uses CAt-5 cable terminated with
RJ45 connection plugs. the CAt-5 cable must be terminated using the t568A
standard wiring.
REPEATER BASE
WIRELESS KEYPAD
MASTER BASE
RFG DIP SWITCH MODES
NOT ASSIGNED
SEE MANUAL
RFG
RADIO FREQUENCY
GATEWAY
1 2
ON
Figure 9.
RF Mode
dipswitch setting
dipswitches