Nortel Networks NS4540 - Manual (Page 46)

NetComm NS4540 Dome Camera User Guide YML7** Rev1
46 www.netcomm.com.au
Save Script: Command to save and parse current scripts in the "Event Script Edit" window. If
any syntax errors are detected, the error message, indicating the starting position of syntax
error, will be shown in the "Message" window.
Event Auto Start when Power On: The flag is to set the event script auto start-up when the
system is powered on.
Note: Any changes in "Event Script Edit" window you must "Save Script" before "Start
Script"; otherwise, the new changes will be lost and will not take effective. Also
the changes won't be saved into permanent memory unless you click the "Save
Changes" button in the main Administration panel.
Clear: Command to clean up "Event Script Edit" window.
Start Script: Command to start the script execution.
Stop Script: Command to stop the script execution.
Script Wizard: Command to start the script wizard. It helps user to make simple script
automatically by wizard, but the wizard supports only partial trigger and action commands. To
fully leverage the complete functionalities of event script, please refer to "Event Script
Programmers Guide".
Set Motion Detection Area: In order to activate the motion detection, you must choose the
detection area and start the motion detection script manually or by wizard.
NETCOMM NS4540 Surveillance System is suitable for a wide range of surveillance applica-
tions. The system can be as single NETCOMM NS4540 with one keyboard or encompassing
as 64 domes with comprehensive matrix switching, PC control and even Digital Video
Recording.
Such flexibility means future expansion is easily facilitated. For more details about this option
please contact NetComm .