Nortel Networks NS4540 - Manual (Page 36)

NetComm NS4540 Dome Camera User Guide YML7** Rev1
36 www.netcomm.com.au
6-1-3 Clock Setting
The built-in real-time clock of NETCOMM NS4540 provides accurate date/time for the system
even when the power is off. For different time zones or long periods of operation, you may
need to adjust the clock --- simply enter Time and Date information then click Submit.
Click "Set as PC clock" button to set the date/time of the NETCOMM NS4540 as your PC's.
Click "Save Changes" button to save data changes in NETCOMM NS4540 before power off.
6-1-4 System Command
Load Default: The Load Default retrieves all except network setting.
Note: The factory default just recovers the working settings but it is not saved to
permanent memory (the system will revert to previous setting after re-boot). To
change the boot settings, you must set "Save Changes".
Save Changes: Save the working setting to permanent memory that will retrieve after reboot.
Reboot System: Forces the NETCOMM NS4540 to restart.