Nokia 21XX - Manual (Page 18)

18
Display 42 (dualband) – Handover display, INTRA CELL
++++++++++++++ ##############
+ aaaa bbbb + #G>G IntraD>D#
+ cccc dddd + #G>D OK D>G#
+eeefffggghhh+ #IntraHoFail #
+iiijjjkkklll+ # BackToPrev #
++++++++++++++ ##############
aaa counter of successful INTRACELL handovers (max 9999) from GSM900 to GSM900
bbb counter of successful INTRACELL handovers (max 9999) from GSM1800 to GSM1800
ccc counter of successful INTRACELL handovers (max 9999) from GSM900 to GSM1800
ddd counter of successful INTRACELL handovers (max 9999) from GSM1800 to GSM900
eee
counter of failed INTRACELL handovers (max 999) from GSM900 to GSM900
fff counter of failed INTRACELL handovers (max 999) from GSM1800 to GSM1800
ggg counter of failed INTRACELL handovers (max 999) from GSM900 to GSM1800
hhh counter of failed INTRACELL handovers (max 999) from GSM1800 to GSM900
iii
counter of successful back to previous normal INTRA CELL channel attempts
(max 999) from GSM900 to GSM900
jjj counter of successful back to previous normal INTRA CELL channel attempts
(max 999) from GSM1800 to GSM1800
kkk counter of successful back to previous normal INTRA CELL channel attempts
(max 999) from GSM900 to GSM1800
lll counter of successful back to previous normal INTRA CELL channel attempts
(max 999) from GSM1800 to GSM900
Counters will stop when they reach their maximum. To initialize the counters to zero,
select display 40. Also display 60 initializes these counters.
Display 43 L2 display
++++++++++++++ ##############
+T200MS :aaaa+ #T200 MS GSM #
+T200BS :bbbb+ #T200 BS GSM #
+T200MS :cccc+ #T200 MS DCS #
+T200BS :dddd+ #T200 BS DCS #
++++++++++++++ ##############
aaaa GSM900 : counts how many times T200 in MS has expired and therefore a L2
transmission has been repeated.
bbbb GSM900 : counts how many times T200 in BS (network) has expired and
therefore a L2 frame was requested again.
cccc GSM1800: counts how many times T200 in MS has expired and therefore a L2
transmission has been repeated. (for dualband phones)
dddd GSM1800: counts how many times T200 in BS (network) has expired and
therefore a L2 frame was requested again. (for dualband phones)
The GSM900 counters are also valid in GSM900/GSM1800 multiband phones. Counters will
stop when they reach their maximum. To initialize the counters to zero, select
display 40. Display 60 also initializes these counters.
Display 44 – Toggle revision level
************** **************
* * * *
* REVISION * * REVISION *
*LEVEL IS 00 * *LEVEL IS 01 *
* * * *
************** **************
When selected, changes the value of Revision Level from 0 to 1 and vice versa. I have
no idea if this makes sense in any circumstances.