beautypg.com

Nokia 21XX User Manual

Page 13

background image

13

Display 21 – Constant voltage charging display

************** ##############
* aaaa bbbb * #MTDif MPDif #
* cccc dddd * #BupV BDownV#
* eeee ffff * #AverV SumMF #
* * # #
************** ##############


aaaa

Difference between measured voltage and goal voltage, decimal point is not
shown.

bbbb

Difference between measured voltage and result of previous measurement
(basically same as using change of error), decimal point is not shown.

ccc

Battery up voltage (highest measured voltage), maximum ripple voltage.

ddd

Battery down voltage (lowest measured voltage), minimum ripple voltage.

eee

Average measured voltage.

fff

Sum of membership function sets beliefs, range 0.00-9.99, decimal point is
not shown; e.g. 1.53 is shown as 153. If sum of 1.00 is reached then battery
full indication is shown.


Display 22 – Battery full detection

************** ##############
* Eaaa Cbbb * #DeriC ChAm #
* Dccc Rddd * # VDif VDrop #
* Ieee Afff * # VDTi AvDif #
* Tggg hhhh * # Temp Volt #
************** ##############

Letters E, C, D, R, I, A, T and V are displayed if values are shorter than 4 digits.

Eaaa

DerivCount membership function set, range 0.00-1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.

Cbbb

ChargeAmount membership function set, range 0.00-1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.

Dccc

VolDiffToMax membership function set, range 0.00-1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.

Rddd

VolDropCnt membership function set, range 0.00-1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.

Ieee

VolDiffTime membership function set, range 0.00-1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.

Afff

AverDiff membership function set, range 0.00-1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.

Tggg

Temperature membership function set, range 0.00-1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.

Vhhh

Voltage membership function set, range 0.00-1.00, decimal point is not
shown; e.g. 0.23 is shown as 023.



This manual is related to the following products: