Voice recognition -9, Voice recognition – NISSAN 2011 Altima Hybrid User Manual
Page 303
Symptom
Possible cause
Possible solution
The system does not recognize the voice command.
or
The system accepts the voice command incorrectly.
The interior of the vehicle is too noisy.
Close the windows or have other occupants be quiet.
The volume of the voice is too low.
Speak louder.
The volume of the voice is too loud.
Speak softer.
Pronunciation is unclear.
Speak clearly.
The voice command is given before the voice recognition sys-
tem is ready.
Press and release the
button on the steering
wheel switch, and speak a command after the tone
sounds.
8 seconds or more have passed after pressing and releasing
the
button on the steering wheel switch.
Make sure to speak a command within 8 seconds after the
beep tone sounds.
Only a limited range of voice commands is usable for each
screen.
Use a correct voice command appropriate for the current
screen.
INFO:
For the best recognition, speak appropriate commands. Command lists are available earlier in this manual.
Standard Mode:
“Command List” (page 9-7)
Alternate Mode:
“Command List” (page 9-19)
VOICE RECOGNITION
Troubleshooting guide
11-9