NEC PF32W503 - Manual (Page 11)

20
TO SELECT THE SCREEN COLOR
When no signal is being received,
the TV will automatically turn blue
or red at the time SCREEN BLUE or
SCREEN RED on.
1. Press the MENU button to select
the FEATURES and then to be
displayed on the right appearance.
Press PR
y / x buttons to select
the SCREEN.
2. Press the C / B buttons to change OFF, BLUE and RED.
TO SELECT DEMO
Demo function shows all current
configured OSD menu one by one.
1. Press the MENU button to select
the FEATURES.
2. Select the DEMO with the PR
y / x buttons.
3. Press the C / B buttons, the demo function is started.
4. If you want to be out of demo function, press the MENU button.
21
TO SELECT THE AUTO VOLUME CONTROL
Different sound source (eg.
Advertisement during movies) fairly
often do not have the same volume
level.
In the case, you can equalize the
volume with the AVC(auto volume
control) ON.
1. Press the MENU button to select
the FEATURES and then to be
displayed on the right appearance.
2. Press the PR y / x buttons to select the AVC(auto volume control).
3. Press the C / B buttons to change AVC (auto volume control) ON.
* NOTE
With the AVC(auto volume control) ON, the maximum volume
level can be down. You can maximize the volume level with the
AVC(auto volume control) OFF.
TO SELECT CHANNEL LOCK
1. You can prevent the watching of
some channel without the remote
controller.
2. Keep on pressing CHANNEL
LOCK button until it displays :
“LOCK ON”.
3. The TV can be switched back on
only using the remote controller.
4. If you want to watch this channel,
you must select CHANNEL LOCK OFF.
TO SELECT CHILD LOCK
1. You can prevent the use of the TV
set without the remote control.
Press the MENU button to select
the FEATURES and press the PR
y / x buttons to select the CHILD
LOCK.
2. Press the C / B buttons to change
CHILD LOCK ON. Then the
program will be locked.
3. Press the “POWER” button in the
remote control to be at stand by mode.
4. The TV can be turn on only using the remote controller.
PRO1
MONO
LOCK ON