NHT Evolution System User Manual
Page 34
6.2 Power Connections
The X1 crossover receives power via the LL-1
power supply.
The A1 amplifier receives power via the detach-
able IEC style power cord.
Caution: Prior to connecting the A1
amplifier to your audio system, make
sure that all your other electronic
equipment is turned off or unplugged.
7.0 Basic Settings for the X1 Active
Crossover
The following diagrams will provide starting
points for each control feature on the X1. The
diagrams are organized by Evolution model.
Begin with these basic settings and then move
to Section 8 which describes each X1 control
function in detail and provides advice for fine
tuning the X1 to your listening room.
Note: If you are using main speakers other than
Evolution, use the initial settings described for
the U1 or U2 subwoofer.