Nikon Coolpix 100 - Manual (Page 33)

21
To change the flash setting, press the ADJUST button.
ADJUST button
ADJUST button
ADJUST button
Auto
Off
On
ADJUST
When the flash is set to “Auto”, pressing the shutter release button half-way
will activate the auto exposure circuitry, causing the flash to charge
whenever lighting is poor. Changing the setting to “On” causes the flash to
charge each time the shutter release button is pressed. You will not be able to
take photographs until the flash is fully charged.
When the flash is fully charged, the shutter release lamp will glow steadily.
Press the shutter release button the rest of the way to fire the flash and record
an image.
Note: The COOLPIX 100's built-in flash has a range of 1.2 – 2.25 meters
(3´11˝ – 7´5˝).
Beyond the Basics : Using the Flash
Shutter Release Lamp