NEC LT170 - Manual (Page 28)

E-28
3. Rotate the SELECT +/- dial clockwise.
Keep rotating the SELECT +/- dial until the highlight reaches [Noise
Reduction]. When the highlight reaches [Flicker Reduction], [Setup 1]
menu will be displayed.
Keep rotating the SELECT +/- dial clockwise and the menu items will
sequence as follows: [Image]
→ [Setup 1] → [Setup 2] → [Information] →
[Default] → [Image] → ...
Keep rotating the SELECT +/- dial counterclockwise and the menu items
will sequence as follows: [Default]
→ [Information] → [Setup 2] → [Setup
1] → [Image] → [Default] → ...
Adjusting and Setting Items
For Adjusting items
1. Rotate the SELECT +/- dial to highlight the menu item you want to
adjust.
2. Press the ENTER button.
3. Rotate the SELECT +/- dial to adjust the item.
4. Press the ENTER button.
Changes will take effect.
For Selecting items
1. Rotate the SELECT +/- dial to highlight the menu item you want to set.
USING ON-SCREEN MENU
2. Press the ENTER button.
The selected item will be displayed.
3. Rotate the SELECT +/- dial to highlight the item you want to set.
4. Press the ENTER button.
This will return to the previous menu.
NOTE:
The ENTER/SOURCE button on the cabinet works as:
* Execute menu selection.
* Adjust the slide bar.
* Display the submenu