Focusing on a moving subject in active child mode, Active child mode – Nikon S610 - S610c User Manual
Page 59
47
F
o
cusi
ng on
a
M
o
vin
g
Sub
ject
in
Ac
tiv
e
Ch
il
d M
o
d
e
Focusing on a Moving Subject in Active Child Mode
Active Child Mode
Use this mode to shoot moving subjects. Once the subject has been selected, the
focus area will automatically follow the subject.
1
Enter active child mode by pressing
the
e button in shooting mode,
selecting s (use the rotary multi
selector), and then pressing the
k
button.
• A white border is displayed in the center of
the monitor.
• Flash mode (
A 30) is set to W (Off) (the setting can be changed).
2
Select a subject.
• Frame the subject in the center of the border and press
the
k button.
- The subject is selected and will be framed by a yellow
double border.
- When the camera is unable to focus on the subject,
the single border will glow red. Change the
composition and try again.
• Once the selected subject is not visible on the monitor,
the double border will disappear and the selection will
be cancelled. Select the subject again.
3
Press the shutter-release button halfway.
• The camera focuses on the focus area framed by the
double border. The double border will glow green and
focus will be locked.
• When the camera is unable to focus, the double border
will blink. Press the shutter-release button halfway
again and focus.
• If the shutter-release button is pressed halfway while the double border is not
displayed, the camera focuses on the subject at the center of the frame.
4
Press the shutter-release button the rest of the
way down.
• The picture will be recorded to the memory card or
internal memory.
Active child
Start
Start
Start
F2.7
F2.7
F2.7
1/250
1/250
1/250