Commands, Commands 18 – Nortel Networks ALTEON OS BMD00009 User Manual
Page 18

Alteon OS BBI Quick Guide
18
Browser-Based Interface Basics
BMD00009, November 2007
Commands
The following general commands are available on the toolbar:
Apply
Pending configuration changes do not take effect until you click the Apply
command. Once applied, all changes take effect on the switch immediately. If
you do not save the changes, however, they will be lost the next time the
switch is rebooted.
Save
Writes applied configuration changes to non-volatile flash memory on the
switch.
Revert
Removes pending configuration changes made since the last Apply command.
Use this command to remove pending configuration changes made since the
last Apply command.
Diff
Show any pending configuration changes.
Dump
Generates a dump of critical state information in the switch.
Show Log
Opens a new Web-browser window for displaying the most recent switch log
messages. Close the log browser when finished.
Help
Opens a new Web-browser window for displaying the basic online help infor-
mation. Close the help browser when finished.
Logout
Log off the switch and exit the BBI.