Nokia 2272 - Manual (Page 53)

[ 53 ]
Advanced features
OR
Press Search to recall the number from the phone book.
4 Press the Send key again to connect both parties.
5 To end the call, press the End key.
This action disconnects both parties.
End calls
To end a conference call, that is, to disconnect with all callers, press the End key, or
press Options > End all calls .
Disconnect one party
If you wish to disconnect with the first party and remain connected to the second
party, have the first party terminate the call on his/her end.
• SEND OWN CALLER ID WHEN CALLING
This feature allows you to block caller ID when you call someone (your number will
not be displayed on their caller ID). This feature may only be effective when calling
a number equipped with caller ID.
Note: This feature is available only when supported by the wireless network and may
not function if you are roaming.
Important: This feature works on a call-by-call basis. You must enable this feature
each time you want to block the sending of your own number to the caller ID.
Store feature codes
Before you can use the Send own caller ID when calling feature, you must store the
feature codes for activating this feature. Once the code is stored in your phone, it
is sent automatically to the network when you select this option from your phone
menu.
1 Press Menu > Settings > Network services > Network feature setting .
The Feature code field appears after a few seconds.
2 Enter the feature code your service provider gave you (for example, *67 for
activating
Send own caller ID when calling ), and press OK .
3 Scroll to Send own caller ID when calling and press Select .
4 Select No to assign the activation code.
Place a call without sending your number
1 Press Menu > Settings > Network services > Send own caller ID when calling .
2 Scroll to No , and press Select .
3 Enter the desired phone number, and press OK .