Nikon SB-30 - Manual (Page 27)

E
25
Taking flash pictures
1 Make the necessary settings on the camera as with a normal Speedlight.
2 Set the SB-30’s Mode selector dial to Wireless slave flash (A).
• In wireless slave flash shooting, exposure compensation using the SB-30’s Exposure compensation switch
is not possible. In this case, make exposure compensation on the camera.
3 Set the master Speedlight’s flash mode to TTL auto flash.
• Be sure to cancel the master Speedlight’s Monitor Preflash (p. 21).
• If Monitor Preflash cannot be canceled, set the flash mode to other than the TTL auto flash mode.
• The D-TTL auto flash mode is not possible with the SB-30. With Digital SLRs cameras, set the flash mode to
Non-TTL auto flash or Auto Aperture flash.
4 Check the aperture and flash shooting distance, then shoot.
Basic operation