Call park – Nortel Networks M2006 User Manual
Page 39
33
Call Park
Call Park allows a call to be held temporarily, then to be retrieved from any other
DN
. You can park an incoming call and then page the called party, without tying
up a line. Your office may have a System Park
DN
where most calls are
automatically parked.
If configured networkwide, Call Park can be used across networks.
To park a call on the System Park
Extension or your own
DN
:
¢
¢
Press
Park
twice. If there is a System Park
DN
, the call is parked on it. Otherwise, it is
parked on your
DN
.
Note:
for MSL-100 Press
Park
once and
the call is parked
To park a call on a
DN
other than the
System Park Extension or your own
DN
:
¢
1. Press
Park
.
2.
Dial
the
DN
.
¢
3. Press
Park
again.
Note:
MSL-100 uses
Directed Call Park
(DCPK)
To park a call using the
SPRE code
or
FFC
:
†
or
ø
1. Press
Transfer
or
Conference
.
2.
Dial
the
SPRE code
followed by
‡⁄
‡⁄
‡⁄
‡⁄
, or enter the
Call Park FFC
.
3. If you don't want the System Park
Extension or your own
DN
,
Dial
a
DN
.
†
or
ø
4. Press
Transfer
or
Conference
again.
Note:
MSL-100 uses
Conference
only.
During a call: Call Park