Nikon Coolpix S210 - Manual (Page 119)

107
Basic Camera Setup: The Setup Menu
S
h
ooti
n
g
, Pl
ay
bac
k
an
d
S
e
tup
M
e
nus
w Electronic VR
Choose whether to use electronic VR (vibration reduction) when shooting still
pictures.
When Auto is selected, R appears on the monitor (
A 6), and electronic VR is
applied depending on shooting conditions.
B
Note on Electronic Vibration Reduction
• Except during slow sync mode, electronic VR will not activate when flash is used.
• If the exposure period exceeds a certain period of time, electronic VR will not function.
• The effectiveness of electronic VR decreases as camera shake increases.
• Electronic VR does not reduce the effects of subject movement.
• Saving a picture on which electronic VR is applied may take some time.
• Electronic VR will not activate when sensitivity is ISO 800 or above.
• Electronic VR cannot be used together with date imprint (A 105). When using date imprint,
setting electronic VR to Auto automatically changes the date imprint setting to Off.
• Electronic VR and auto flash with red-eye reduction cannot be used together.
D
Electronic VR Icons in Playback Mode
Pictures on which electronic VR has been applied can be recognized by the R icon displayed in full-
frame playback mode. The Q icon appears on pictures on which electronic VR cannot be applied
(
A 6, 7).
D
Electronic VR for Movies
To compensate for vibration while shooting a movie, go to the movie menu ( A 58) and enable
Electronic VR ( A 58).
Auto
When all of the following conditions are met while shooting still pictures, electronic
VR is applied and the effects of camera shake are reduced.
• The flash is turned off or set to slow sync mode.
• The shutter speed is slow.
• The Continuous option is set to Single.
Off (default setting)
Electronic VR is disabled.