Nokia 252 - Manual (Page 54)

50
7. Data and Touch Tones
Data Mode can be used when your phone is connected, via a
suitable data card and modem, to a laptop or personal
computer. You may then use your computer to make and
receive calls, and to send and receive data messages such as
emails.
Data Mode
Follow these steps before using Data Mode:
• Ensure your phone is switched on, and that the battery has
enough charge for the duration of your data calls.
• Ensure that you are receiving a strong signal (see signal
strength indicator on the display).
• Ensure that your computer is switched on, and is fitted with
a data card.
• Connect the data cable to the data card, and to your
phone.
To select Data Mode
Connect the data cable to your phone ( DATA CARD CONNECTED
displays). When in a call, with the data cable connected, the
phone displays
DATA CALL .
In a data call, the keys on the phone don’t work except for ;
when not in a call, all keys work. Also, the microphone and ear-
piece don’t work in a data call.
Important! When you are in Data Mode, do not switch off the
phone. Do not move the phone, or use it in a moving vehicle
(data will be lost if you move from one cellular cell to another).