Table 3-1. national instruments mxi-3 cables, Table 3-2. molex mxi-3 fiber-optic cables, Table 3-1 – National Instruments PXI-PCI 8330 Series User Manual
Page 22: National instruments mxi-3 cables -6, Table 3-2, Molex mxi-3 fiber-optic cables -6

Chapter 3
Hardware Overview
PXI-PCI 8330 Series User Manual
3-6
www.natinst.com
If you require lengths greater than 30 meters in fiber optic cable, contact
Molex, cable vendor for National Instruments. Table 3-2 describes Molex
cables. The fiber-optic cable offered by Molex is a multimode, 62.5/125
µ
m
cable with a duplex, zipcord, 3.0 × 6.5 mm, OFNR cable construction. The
connector style is SC Duplex with a multimode, ceramic ferrule. A standard
PC finish is used on both ends.
For more information, you can contact Molex through its Web site at
http://www.molex.com
, or at Molex Incorporated, 2222 Wellington
Court, Lisle IL 60532-1682, USA, 1-800-786-6539.
Table 3-1. National Instruments MXI-3 Cables
Cable length (meters)
Description
2 m
MXI-3 copper cable
5 m
MXI-3 copper cable
10 m
MXI-3 copper cable
30 m
MXI-3 fiber optic cable
Table 3-2. Molex MXI-3 Fiber-Optic Cables
Cable length (meters)
Molex Part Number
60 m
MXBBA-FGA-FGA-M060-A000-A000
XXX m
MXBBA-FGA-FGA-Mxxx-A000-A000