NEC 4200W - Manual (Page 38)

33
Setting the appropriate main menu display for the
system
Set the main menu display according to the connected
equipment (monitor only, selector).
Example: When a selector is connected (setting “SE-
LECTOR”)
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “INFORMATION”,
then press the “OK” button.
The “INFORMATION” screen appears.
2. Use the ▲ and ▼ buttons to select “COMMUNICA-
TION”, then press the “OK” button.
4. To set to “ SELECTOR “ ...
Use the ᮤ and ᮣ buttons to select “SELECTOR”.
The mode switches as follows when the ᮤ and ᮣ but-
tons are pressed:
→
AUTO
↔
TUNER
↔
SELECTOR
↔
NO INPUT
←
I N F O R M A T I O N
F R E Q U E N C Y
C O M M U N I C A T I O N
L A N G U A G E
C O L O R S Y S T E M
R E T U R N
SEL.
OK
EXIT
O K
MENU
The “COMMUNICATION” screen appears.
3. Use the ▲ and ▼ buttons to select “COMMUNICA-
TION”.
C O M M U N I C A T I O N
COMMUNICATION
RETURN
A U T O :
SEL.
ADJ.
EXIT
MENU
C O M M U N I C A T I O N
COMMUNICATION
RETURN
S E L E C T O R :
SEL.
ADJ.
EXIT
MENU
5. Once the setting is completed ...
Press the “MENU” button.
The communications setting is set to “SELECTOR”
and the menu disappears.
Information
Ⅵ
“COMMUNICATION” settings
AUTO ................. Detects the connected equipment
automatically.
TUNER ............... Not available on this model.
SELECTOR ........ Set this when a selector (optional
PX-SL1A) is connected.
NO INPUT .......... Set this when using the monitor
alone.