NEC 4200W - Manual (Page 26)

21
Reducing noise in the picture
Use these settings if the picture is noise due to poor recep-
tion or when playing video tapes on which the picture qual-
ity is poor.
Example: Setting “NR-2”
Press the MENU button on the remote controller to dis-
play the MAIN MENU on the screen, then...
1. Use the ▲ and ▼ buttons to select “PICTURE/
SOUND”, then press the “OK” button.
The “PICTURE/SOUND” screen appears.
2. Use the ▲ and ▼ buttons to select “NR “.
4. Press the “OK” button.
The noise reduction mode is set to “NR-2”.
P I C T U R E / S O U N D
P I C T U R E
P I C T U R E M O D E : M E M O R Y
N R : N R – 1
S O U N D
R E T U R N
SEL.
ADJ.
EXIT
MENU
N R - 2 N R :
3. Use the ᮤ and ᮣ buttons to select “NR-2”.
The mode switches as follows when the ᮤ and ᮣ but-
tons are pressed:
→
OFF
↔
NR–1
↔
NR–2
↔
NR–3
←
* If neither the ᮤ or ᮣ button is pressed within 5 sec-
onds, the current selection is set and the previous
screen reappears.
P I C T U R E / S O U N D
P I C T U R E
P I C T U R E M O D E : M E M O R Y
N R : N R – 2
S O U N D
R E T U R N
SEL.
ADJ.
EXIT
MENU
5. Once the setting is completed ...
Press the “MENU” button.
All menus disappear.
Information
Ⅵ NR
* “NR” stands for Noise Reduction.
* This function reduces noise in the picture.
Ⅵ
Types of noise reduction
There are three types of noise reduction. Each has a dif-
ferent level of noise reduction.
NR-1
NR-2
NR-3
OFF .......... Turns the noise reduction function off.