N-Tron 102PC-SE User Manual
Page 8

(Revised 2010-11-15)
8
FRONT PANEL
From Top to Bottom:
Green LED lights when Power is connected
RJ45 Ports
Auto sensing 10/100 BaseTX Connections
Serial
RS232 serial port with DCE configuration
NOTE: The RJ45 data port has two LED‟s located at the left side of the connector. The top LED indicates
Activity (ACT), and the lower LED indicates Link (LNK) status.
LED’s: The table below describes the operating modes:
LED
Color
Description
GREEN Power is Applied
OFF
Power is OFF
LNK
GREEN 10/100Mb Link between ports
OFF
No Link between ports
ACT
GREEN Data is active between ports
OFF
Data is inactive between ports