Cli tree of menus, Set (set configurable fields) – N-Tron 102PC-SE User Manual
Page 15

(Revised 2010-11-15)
15
CLI TREE of MENUS
Set
(Set configurable fields)
o ag-server
(Configure ag-server)
enable/disable
(enable or disable ag-server)
o auto-discovery
(Configure auto-discovery feature)
broadcast-timer
(set the broadcast timer)
enable/disable
(enable or disable auto-discovery)
server-port
(set the server‟s port number)
o boot-messages
(Setup boot messages)
enable/disable
(enable or disable boot-messages)
o bridge
(Configure bridge modes)
enable/disable
(enable or disable bridge mode)
ipmodule ip-address
(Configure the bridge‟s ip address)
o date
(Configure the date in DD/MM/YYYY format)
o device-parameter
(Set new device parameters, up to 99)
o ftp
(Configure FTP information)
machine
(remove FTP login options)
filename
(specify the filename)
filesize
(specify the file size)
directory
(specify a directory)
o login
(Configure login settings)
auto-dialout-login
(enable or disable auto-dialout-login)
enable/disable
(enable or disable login feature)
o ip
(Configure IP settings for the Ethernet port eth0)
auto-dialout
(enable or disable the auto-dialout feature)
def-gway
(setup the default gateway in the format of xxx.xxx.xxx.xxx)
dns
(enable or disable the DNS features below)
hostname
(setup the 102PC-SE‟s hostname)
http
(enable or disable the webpage options)
http-page
(display the serial page or the default page)
http-port
(configure the port number that the web page is broadcasted over)
http-banner
(set a string to be the http banner)
pri-dns
(setup the primary DNS server in the format of xxx.xxx.xxx.xxx)
sec-dns
(setup the secondary DNS server in the format of xxx.xxx.xxx.xxx)
syslogd
(enable or disable system logging)
syslogd-server
(setup the server for log files in the format of xxx.xxx.xxx.xxx)
tcp-keepalive
(configure the time intervals between keep alives, 3-120 minutes)
telnet
(configure user settings when using telnet to connect to the device)
escape-monitor
(enable or disable the escape monitor)
escape-string
(set the escape string, default is „+++inet‟)
inactivity
(enable or disable an inactivity timout)
inactivity-timeout
(set the inactivity age time)
raw-mode
(enable or disable raw mode)
telnet-port
(set the telnet port number)
tftp
(enable or disable TFTP)
udp
(configure udp settings)
inactivity
(enable or disable udp‟s inactivity feature)
inactivity-timeout
(set the inactivity timeout period)
terminate-monitor
(enable or disable terminate-monitor)
terminate-string
(set the terminate string)
eth0
(configuration options for Ethernet port eth0)
dhcp-client
(enable or disable DHCP over eth0)
ip-address
(set a static IP address and subnet mask)
o ppp ppp0
(Configure ppp settings for the ppp0 port)
auth-type
(chap, pap, or pap-chap authentication types)
authentication
(enable or disable authentication)
compression
(enable or disable compression)
comp-type
(bsd, deflate, or both compression types)
enable/disable
(enable or disable ppp0)
password
(set a ppp0 password)
raw-mode
(enable or disable raw-mode)
username
(set a ppp0 username)
(continued…)