NEC M400 - Manual (Page 28)

NEC Versa M400/PB EasyNoteM5 M7 Disassembly Manual Page 28
Removing the Touch Pad
To remove the touch pad, first remove the Main Board (see Removing the Main Board ), then
perform the following steps:
1. Unscrew the screws on the Touch Pad assembly as shown in Fig. 42 and remove the touch
pad assembly from the Top cover.
Fig. 42 Touch Pad
Removing the Speaker Assembly
To remove the Speaker assembly, first remove the Main Board (see Removing the Main Board ),
then perform the following steps:
1. Remove the screws holding Audio Board holder as shown in Fig. 43
Fig. 43 Screw at Audio Board Holder
2. Carefully remove the Speaker assembly from bottom base and place it aside.
M2x3 Black
M2x3.5 Black