NEC M400 - Manual (Page 20)

NEC Versa M400/PB EasyNoteM5 M7 Disassembly Manual Page 20
Removing the CPU
To remove the CPU, first remove the battery (see Removing the Battery ), then perform the
following steps:
1. Remove the screw retaining the CPU Cover as shown in Fig. 29
Fig. 29 CPU Cover
2. Release all screws on the heat sink, disconnect the Fan connector and carefully remove the
heat sink as shown in Fig. 30
Fig. 30 Removing the heat sink
M2.5x5 Black
M3x21 Silver