Napoleon Fireplaces BGNV40-P - Manual (Page 24)

24
W415-0813 / A / 04.19.10
Do not overtighten thermal switch or distort housing. Attach the connectors from the black and red wires to the blower.
Attach and secure the variable speed switch using the nut provided. Plug the harness cord into the receptacle.
The wire harness provided in this kit is a universal harness. When installed, ensure that any excess wire is contained,
preventing it from making contact with moving or hot objects.
Drywall dust will penetrate into the blower bearings, causing irreparable damage. Care must be taken to prevent drywall
dust from coming into contact with the blower or its compartment. Any damage resulting from this condition is not covered
by the warranty policy.
Because the blower is thermally activated, when turned on, it will automatically start approximately 10 minutes after light-
ing the appliance and will run for approximately 30 - 45 minutes after the appliance has been turned off. Use of the fan
increases the output of heat.
51.4