Nokia 30 - Manual (Page 5)

3/18
REFERENCES
1. Nokia 30 GSM Connectivity Terminal Product Guide
2. Nokia 30 GSM Connectivity Terminal Technical Specification
3. M2M System Connector Electrical Specification for Nokia 30 GSM Connectivity
Terminal
1. DOCUMENT SCOPE
This document describes how the Nokia 30 GSM Connectivity Terminal can be used in User
control mode. The ways of controlling the terminal in this operation mode is described as well
as how this can be done in a more secure way.
For more detailed information about the Nokia 30 GSM Connectivity Terminal, other Nokia
M2M products and application development for M2M, please visit Forum Nokia and M2M
links at
http://www.forum.nokia.com .
2. PRODUCT CONCEPT AND USAGE
2.1 GENERAL
Nokia 30 is a GSM Connectivity Terminal for EGSM 900/GSM 1800 networks. It includes a
GSM transceiver with built-in data capabilities, a SIM card reader, an internal antenna, an
external antenna connector, and an M2M system connector.
The Nokia 30 GSM Connectivity Terminal has three different operation modes:
§ User control mode
§ AT command mode and
§ M2M system mode
In AT command mode the Nokia 30 GSM Connectivity Terminal is used as a GSM data
modem using AT commands. In M2M system mode the Nokia 30 is used as a part of Nokia
M2M Platform using CORBA messaging.
2.2 USER CONTROL MODE
In the user control mode the Nokia 30 GSM Connectivity Terminal is controlled with e.g. a
mobile handset. Text message (short message service = SM) templates that are sent from
the mobile to the Nokia 30 instruct the terminal, which in turn controls a device or machine,
attached to it through the M2M system connector.