Nokia 30 - Manual (Page 13)

11/18
7. COMMAND TEMPLATES
7.1 COMMAND LIST
The Nokia 30 GSM Connectivity Terminal supports the following text message templates as
commands and they are not case sensitive (see Table 2).
Table 2 Nokia 30 GSM Connectivity Terminal User control mode command list
Command Description
Change_Pword Change password
Input_Get All
Return states of all inputs
Input_Get 1 Return a state of input 1
Input_Get 2 Return a state of input 2
Input_Get 3 Return a state of input 3
Input_Get_Change All
Subscribe a input state change of all inputs
Input_Get_Change 1
Subscribe a state change of input 1
Input_Get_Change 2
Subscribe a state change of input 2
Input_Get_Change 3
Subscribe a state change of input 3
Output_Get All
Return a state of all outputs
Output_Get 1 Return a state of output 1.
Output_Get 2 Return a state of output 2
Output_Get 3 Return a state of output 3
Output_Get 4 Return a state of output 4
Output_Get 5 Return a state of output 5
Output_Set 1 On Set output 1 ON
Output_Set 1 Off Set output 1 OFF
Output_Set 2 On Set output 2 ON
Output_Set 2 Off Set output 2 OFF
Output_Set 3 On Set output 3 ON
Output_Set 3 Off Set output 3 OFF
Output_Set 4 On Set output 4 ON
Output_Set 4 Off Set output 4 OFF
Output_Set 5 On Set output 5 ON
Output_Set 5 Off Set output 5 OFF