NEC MultiSync XG-1352 - Manual (Page 19)

19
ⅥWhen selecting “NEW”
The current settings are registered as a new signal and are
saved to an unassigned line starting at memory location
No.51.
A registered name is automatically given.
The “NEW ENTRY?” menu will be displayed.
Use the CURSOR or button to highlight “YES” or
“NO” and press ENTER.
Items to select
• YES ------------- Registers settings as a new signal and
saves the signal in an unassigned
location starting at memory location
No.51.
• NO -------------- Does not register settings.
A registered name is given as follows:
VIDEO/S-VIDEO ----- Video standard with a list number
e.g. NTSC51 or PAL52.
RGB --------------------- ”RGB” with a list number e.g.
RGB60.
NOTE:
• If the Input list does not have any unassigned memory
location starting at No. 51 then, the “NEW” item will be
selectable. For signal registration see “SIGNAL ENTRY” in
the Set-Up manual included only with the XG-1352/XG-
852 models, and if you own XG-1352G/XG-852G, contact
your dealer.
• The Automatic Save Feature is available only for signals
listed in the INPUT LIST.
NEW ENTRY?
LIST No. **
NAME ********
YES NO
BASIC OPERATION