NEC MultiSync XG-1352 - Manual (Page 16)

16
123456
123456
123456
123456
123456
123456
BASIC OPERATION .
Picture Projection
To project a picture source, proceed as follows:
1 Turn on the main power of the projector.
• Press the POWER switch on the front panel to the ON position ( I ).
2 Turn on the power of the connected equipment.
3 Turn on the power of the projector.
• Press the POWER ON button on the remote control or the POWER button on the rear panel.
4 Select an input signal source by pressing one of the ten INPUT buttons on the remote control. You can also select a signal from
the “INPUT SELECT” list.
• See “INPUT SELECTION” on page 24 for more details.
5 Adjust the picture and sound.
• See pages 20 through 23 for more details.
NOTE: The volume function works only with the ISS-6020/ISS-6020G Switcher.
6 To turn off the power, press the POWER OFF button on the remote control or the POWER button on the rear panel.
7 Press the POWER switch on the front panel to the OFF position ( ⅜) to turn off the main power of the projector.
8 Last, turn off the connected equipment power.
Front panel
3 6
POWER
ON OFF
OPERATE
PICTURE
MUTE
SOUND
MUTE
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ /
10 ,.
R
B
END CTL
DISPLAY
STATIC
NORMAL ENTER
CAPTION
4
User remote control
○○○
○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○○○
Projector
ACAT OUT R/Cr G/Y B/Cb H/HV V S-VIDEO VIDEO OPTION REMOTE1 REMOTE2
OUT IN
INPUT SELECT ENTER ON/OFF INDICATOR I
INPUT SELECT POWER
Rear panel
36 4
17