Part identification chart – NordicTrack NTB39020 User Manual

Page 16

Text mode
Original mode

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

PART IDENTIFICATION CHART

REMOVE THIS PART IDENTIFICATION CHART AND PART LIST/
EXPLODED DRAWING. SAVE THIS PART IDENTIFICATION CHART
AND PART LIST/EXPLODED DRAWING FOR FUTURE REFERENCE.

M10 x 116mm Carriage Bolt (53)

M10 Nylon Locknut (64)

M6 Nylon Locknut (66)

M10 x 25mm Screw (56)

M6 Washer (63)

M10 x 165mm Button Head Bolt (5)

M10 x 152mm Button Head Bolt (54)

M10 x 118mm Button Head Bolt (67)

M10 x 70mm Button Head Bolt (52)

M10 x 50mm Button Head Bolt (57)

M10 x 47mm Button Head Bolt (60)

M10 x 22mm Button Head Bolt (59)

M6 x 13mm Screw (21)

M6 Nut (71)

M10 Washer (62)