NETGEAR Universal WiFi Range Extender WN3000RP - Manual (Page 15)

Extender Network Settings
15
Universal WiFi Range Extender WN3000RP
 To use the Extender WPS button to connect:
1. Locate the WPS button on the side of the Extender.
WPS button
2. Press the Extender’s WPS button.
For 2 minutes, the Extender attempts to add a wireless client (a computer or other
wireless device) to its wireless network.
3. Within 2 minutes, press the WPS button on your wireless device, or follow the WPS
instructions that came with your wireless device.
Your wireless device is now connected to the Extender.
To log in to the Extender and use WPS to connect:
1.
From the Extender menu at http://www.mywifiext.net, select Setup > Add WPS Client.
The following screen displays:
2.
Select a radio button.
• Push Button (recommended)
. Either click the button or press the WPS
button on the front of the Extender.
• PIN Number . Select the PIN number radio button and enter the client PIN in the field
that displays.