NETGEAR Universal WiFi Range Extender WN3000RP User Manual
Page 10
Getting Started
10
Universal WiFi Range Extender WN3000RP
After installation, to use the Smart Wizard again:
1.
Log in to the Extender as described previously.
Note:
Once you begin using the Smart Wizard, you must complete all of its
steps before you can exit.
2.
From the menu, select Setup Wizard. The following screen displays:
This is the same Smart Wizard that displays during installation as described in the
installation guide.
3.
Either select a network from the list, or select the Manually input my wireless SSID radio
button and type the SSID.