Nortel Networks 302403-B - Manual (Page 6)

4
The RJ-45 ports are configured as media-dependent
interface-crossover (MDI-X) connectors. These ports
connect over straight cables to the network interface
controller (NIC) card in a node or server, similar to a
2 10 10BASE-T port status LEDs (green):
On: The corresponding port is set to
operate at 10 Mb/s.
Off: The link connection is bad or there is
no connection to this port.
Blinking: The corresponding port is
management disabled.
3 F Dx Full-duplex port status LEDs (green):
On: The corresponding port is in
full-duplex mode.
Off: The corresponding port is in
half-duplex mode.
4 Activity Port activity LEDs (green):
Blinking: Indicates the network activity
level for the corresponding port. A high
level of network activity can cause LEDs
to appear to be on continuously.
5 10BASE-T/100BASE-TX RJ-45 (8-pin
modular) port connectors.
Table 1. 400-4TX MDA Components (continued)
Item Label Description
302403-B.mkr Page 4 Friday, January 15, 1999 2:56 PM