Nortel Networks Station Port Adapter DS30 - Manual (Page 4)

3
DS30/Station Port Adapter Installation Guide
INSTALLATION
1. Connect the TCM Loops from the KSU to a male RJ-45 connector
using the wiring scheme in Figure 2 below. Connect up to 8 TCM
Loops with TCM Loops 1 to 4 in RJ-45 connector 1 and TCM Loops 5
to 8 in RJ-45 connector 2.
2. Insert KSU RJ-45 male connector(s) into the appropriate female RJ-45
connector in the adapter.
3. Insert DS-30 fiber connector of fiber line from Applications Module
into DS-30 Fiber Connector of adapter.
4. Plug power cord into AC Power Connector.
5. Plug the adapter power into an AC wall outlet.
WARNING: Use only UL
CSA/cUL approved Class 2 Wall Mount Power Supply with a rated
output of 12VAC.
Figure 2. TCM Loop RJ-45 Pinout Connections
Female RJ-45
JP1
TCM Loops 1-4
➝
4- 3- 2- 1- 1+ 2+ 3+ 4+
8 7 6 5 4 3 2 1
Loops 1-4
Pins 1-8
To Norstar KSU
➝
To Adapter
RJ-45
Connector
Female RJ-45
JP1
TCM Loops 5-8
➝
8- 7- 6- 5- 5+ 6+ 7+ 8+
8 7 6 5 4 3 2 1
Loops 5-8
Pins 1-8
To Adapter
RJ-45
Connector
To Norstar KSU
➝
1 4 7
2 5 8
3 6
POWER
DS - 30
FIBER OPTIC KSU 5 - 8 KSU 1 - 4
FIBER
LINE
DS-30/Station Port Adapter
Figure 3. Installation Diagram
Norstar KSU Applications Module
Fiber
Spool