Nlynx Wireless Gateway - Manual (Page 60)

60
Information — WAN Link
The Information menu's WAN Link command displays the status of the Wireless
Gateway's WAN port.
Basic status can be “Specify Global IP Address,” “Obtain Global IP Address
Automatically (DHCP),” or “PPP over Ethernet (PPPoE),” depending on which of
these is currently selected in the Basic Setup menu's Broadband Router settings panel.
When basic status is “Specify Global IP Address,” this panel shows settings input by
the user in the Basic Setup menu's Broadband Router panel (and also viewable there).
When basic status is “Obtain Glo bal IP Address Automatically (DHCP)” or “PPP
over Ethernet (PPPoE),” this panel shows the WAN port settings received from the
ISP over the WAN link. Any static DNS server IP addresses input by the user in the
Basic Setup menu's Broadband Router panel are also shown.