Nlynx Wireless Gateway - Manual (Page 50)

50
Advanced Settings — Wireless Bridge
The “wireless bridge” is the circuitry tha t transfers packets between the wireless
access point and wired connections. The purpose of the Wireless Bridge settings panel
is to prevent specified kinds of packets from passing across this bridge. This may be
done to increase network security or to avoid congestion on the wireless segment.
To access the Wireless Bridge panel, click Wireless Bridge in the command panel at
the left edge of your browser window (if the command does not appear there, click
Advanced Settings at the top of the window first). The controls in the Wireless
Bridge panel are explained below.