Appendix b appendix b connector pin assignments, Rj-45 plug and vista rj-45 connector, Appendix b connector pin assignments – NETGEAR ETHERNET SWITCH SW108 User Manual
Page 31: Figure b-1
Connector Pin Assignments
B-1
Appendix B
Connector Pin Assignments
This appendix provides information about the RJ-45 connector used for the NETGEAR
Model SW108 Ethernet switch.
RJ-45 Plug and vista RJ-45 Connector
The RJ-45 plug accepts 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP)
100
Ω
cable and connects into the vista RJ-45 connector.
The vista RJ-45 connector (also referred to as a 10 Mbps port) is used to connect stations, hubs,
and switches through UTP cable and supports 10 Mbps data transmission.
The RJ-45 plug and vista RJ-45 connector are both illustrated in Figure B-1.
Key:
1 to 8 = Pin numbers
Figure B-1.
RJ-45 plug and vista RJ-45 connector with built-in LEDs
711EA
1
8
12345678
SW108.BK Page 1 Friday, June 27, 1997 10:48 AM